
- Products
- Leadership
- About US
- Contact US
- Blog
- FAQ
- Project Cases
With a 10/100M Ethernet interface, line input and output, SIPM-12 is an SIP desktop intercom host that is used with SlP server. This network paging microphone can perform point-to-point IP intercom and multicast to the IP terminal through a microphone or local line input.
As a host of the IP broadcast intercom system, this paging station can be used in places where intercom, monitor and emergency alarms are needed, such as control centers of self-service banks, interrogation rooms, classrooms, hospitals and parking lots.
As an intercom terminal, SIP mic supports full duplex two-way intercom and has good echo suppression. We offer standard sip mode, which can be used in other standard SIP systems and compatible with standard SIP terminal devices.
| Model | SIPM-12 |
| Network Interface | 10/100Base-TX, RJ45 |
| Network Communication Protocol | SIP |
| Microphone Frequency Range | 770Hz to 12.5KHz |
| SNR | 68dB |
| Frequency and Sampling Rate | 8kHz to 32 kHz, 16 bit |
| Decoding | MPEG, ADPC |
| Line Output | Connect to active speaker or amplifier, typical amplitude 2200mVpp |
| Intercom Output | With a waterproof 3W speaker |
| Intercom Mode | Supports quiet mode and noisy mode, button answering and automatic answering, on-site hanging and remote hanging, etc. |
| Power Supply | DC 12V/1A or PoE AF(IEEE 802.3af) |
| T.H.D | <0.05% |
| Operating Temperature | 0℃ to 40℃ |
| Power Consumption | <3W |
| Net Weight | <0.7kg |
| Dimension(WxDxH) | 200 x 120 x 60 mm |
Public Address and Commercial Audio Systems
Copyright © 2024
We will arrange for a specialist to contact you immediately.